Lumatek Tekken Pro Reflector w/ 600W HPS & MH Ballast + Pro Grow 600/750W HPS DE Lamp

[1] x Lumatek Ultimate Pro Digital Controllable Ballast - 600W | 400V | Dimmable

The Lumatek Ultimate Pro 600 has been specifically designed to help the hobby grower access the benefits of using electronics to control and power both 240V MH/HPS and professional 400V HPS horticultural lamps. The Lumatek Ultimate Pro automatically detects the lamp connected and then powers that light. The 400V lamps are superior to the 240V lamps traditionally used in the hobby hydroponics and indoor garden markets due to their increased efficiency and greater PAR spectrum output. Photosynthetic Active Radiation (PAR) refers to the part of the light spectrum that plants actually use to photosynthesize and make an energy to grow. 

Using microprocessor and software-controlled electronics, the Lumatek Ultimate 600 is an ultra-high frequency ballast operating at 120KHz (120,000 cycles per second) for 400V and 90KHz for 240V lamps. 

The new addition of Control capability allows you to smartly monitor your room temperatures, light timing, automation, safety control and dimming. By simply connecting the Lumatek Digital Panel (sold separately) into the TRS “Link” port on your controllable ballast.

Specifications

• Input Current Main (A): 2.9
• Input Power (W): 630
• Operating Frequency (KHz): 120 (Ultra-High Frequency)
• Efficiency (%): 95
• Dimming: 400W – 400WSL – 600W – 600WSL
• Full circuit protection; open/short, over-temperature, over/low voltage, end of lamp life/rectification
• Weight (Kg): 3.0

[1] x Gavita Pro Plus EL HPS Lamp - 750W | 400V | DE | uMol 1450 | Flower Bulb

Gavita horticultural High-Pressure Sodium (HPS) lamp with high output and extreme long light maintenance.

The control range of this lamp is 400- 825W, bridging the gap between 600W and 1000W lamps. We named it 6/750 DE FLEX because it is as efficient running on 600W as it is on 750W. In many cases it is a retrofit replacement for a 1000W air cooled fixture, while running at just 825W. This will save you up to 20% electricity. The output of the lamp, running at 750W, is 1450 µmol s-1 (2 µmol s-1 per Watt).

• Professional European 750W high frequency horticultural lamp
• No wireframe, quartz glass outer bulb for perfect optical quality
• Double ended, K12 x 30S lamp base for accurate lamp positioning
• Extremely high photosynthetic photon flux (ppf): 1450 μmol (see specs)
• Only suitable for high frequency, high voltage Electronic ballasts (Gavita Pro series)
• 1 year warranty on suitable electronic ballasts (Gavita Pro series)

Specifications

• Brand: Gavita
• Type: Pro EL 600 - 750 Watt
• Power: 600 - 750 Watt
• Lamp base: K12 x 30S
• Growlight (µMol): 1450 μmol
• Voltage: 400V
• Suitable for 600W 400V DE Ballast as well

[1] x Lumatek Tekken Pro DE Hammertone - DE Reflector | 250W - 1000W | 61CM x 61CM

The Lumatek Tekken Pro DE is a premium professional grade reflector designed specifically for grow room and grow tent use. The closed-end design is vented to allow heat dissipation and focuses the light straight down into a 1.2 x 1.2m footprint. This is a High performing double-ended reflector with innovative SPPDS-A lamp sockets designed for use with 630W CMH and 1000W 400v DE grow lamps. The Tekken Pro DE is produced using MIRO® reflective surface material which is made from purest aluminium 99.99% and super reflective oxide layer system giving 95 % reflectivity making this tone of the most reflective materials on the market. The Tekken Pro DE is for use with high PAR/PPF output Double Ended HPS, MH & CMH (LEC) grow lamps and features innovative K12x30s (DE) lamp sockets rated for up to 1000W. This high-quality grow light reflector creates good penetration and a uniform square spread of light with no hot spots so that plants grow evenly. The closed-end design and excellent reflective surface ensure maximum light intensity focused straight down onto plants with very little light wasted.

Specifications

• Designed for use with industry-leading 1000W400V DE grow lamps with the highest PAR micromol rating
• Available in 95% reflective Miro or Hammertone Aluminium
• Vented for heat dissipation
• Flat packed with easy assembly instructions
• Rated for lamps up to 1000W
• Available separately or as a 1000W 400V lighting kit
• More light = more yield!