Lumatek LED Grow Light VF120W - 120W | 2.4 umol/J | Dimmable | IP65

Lumatek 650W Driver for VF LEDs can run maximum of 5 Lumatek VF120W!

Lumatek has innovated again and came up with the ideal LED fixture for Seedlings, Clones and for any low PPFD target plants. Meet the new VF120W, with Vertical Farming Range (VF Range). These versatile high efficacy fixtures will ensure you reach your goals when used in Vertical Farming applications. From propagation factories and nurseries, climate chambers, warehouse farms, containers, among others, the Lumatek VF range will deliver the adequate light quality spectral and photon flux levels you need. The VF120W comprises four 30W LED bars with 4000K White and 3000K Warm White diodes, with a total PPF output of 308 μmol/s and a 2.4 μmol/J Efficacy.

The VF range already includes the new clear Glue protection cover technology on the LED bars; resulting in higher light transmittance of 99% without light loss, extended lifetime of diodes, extra corrosion resistance and high waterproofing of IP65. For basic maintenance, simply clean the bars with wet cotton. The fixture will require a 650W Driver (sold separately) that can run up to 5 VF120W fixtures per unit and can be dimmed with a 0-10V Light Dimmer (also sold separately) or externally controlled with our Digital Panel Plus 2.0 or any other Universal Controller 0-10V.

Universal Control Systems Compatibility
Lumatek LED Fixtures can be fully controlled with either the Lumatek Digital Panel Plus 2.0 or with any other Control System that utilises 0-10V output signal. Even if your Universal Controller has an RJ port interface, you can still run our LEDs by using a signal converter RJ to 0-10V control adaptor.