Gavita Pro Line E-Series LEP 270E Plasma SUP Fixture - Supplemental Spectrum | 240V

Local Warranty | Use in Combination with HPS

SKU: BLST80203

Gavita Lighting

Gavita Pro Line E-Series LEP 270E Plasma SUP Fixture - Supplemental Spectrum | 240V

Pick up at store Free

Delivery Charge: Free

International shipping

Click here

SECURE PAYMENTS WITH

BUY NOW, PAY LATER

Pay in 4, interest-free. Afterpay it.

ZIP NOW, PAY LATER

Repay on a convenient weekly, fortnightly or monthly schedule.

ENJOY NOW, PAY LATER

For plants to flourish, nothing beats the sun's spectrum. Plants have evolved for millions of years to thrive in balanced, full-spectrum light that includes UVA and UVB rays. Full-spectrum lighting means the highest-quality crops. That's where Gavita plasma technology comes in.

We have a supplemental plasma light to optimize the quality of your crop. This plasma light adds everything to the HPS spectrum your plant needs to bring it to the next level, including UVB and UVA. The Gavita LEP reflector has a square throw. One advantage this gives is that the fixtures can be inter-positioned between the rows of HPS fixtures. For a commercial layout, we would make two separate lighting plans: One for HPS, one for LEP. That way you achieve the highest uniformity and lightly spread at optimal light levels. Position your LEP’s at the same height as your HPS fixtures. At the recommended height of 105 cm from the crop (for HPS), this would yield a 1.6 x 1.6m footprint with light levels of

Phase	Recommended PPFD	LEP to HPS ratio*
Mother plants	300 - 500 µmol s-1m-2	1 LEP per 100-150W HPS
Vegetative	450-700 µmol s-1m-2	1 LEP per 600W HPS
Generative	700 - 1000 µmol s-1m-2	1 LEP per 1000W HPS

Specifications

Version: 120 - 240 Volt (+/- 10%) SUP 120 - 240 Volt (+/- 10%) GROW
Input current: 2.75 - 1.5 Amps 2.75 - 1.1 Amps
Input power at 100% 290 Watt (+/- 3%) 290 Watt (+/- 3%)
Power factor: 0.95 - 0.99 0.95 - 0.99
Input frequency: 50-60 Hz
Inrush current: < 50 A
Product weight: circa 16.5 lbs
Dimensions (LxWxH): 24.8” x 12.8” x 9.8”
Temperature ambient: 32-95 °F
Relative humidity: 25 – 70% (non-condensing)
Light Source: LUXIM LiFi STA 41.01 or 41.02 plasma emitter
Product weight 11 kg
Temperature case 80 °Celsius
Temperature ambient 0 ~ 35 °Celsius
Input voltage +/-10% 230 - 240 V AC
Input current 1.5 Amp typical (1,7 Amp max.)
Inrush current ≤ 30 Amps
Power factor 0.98
Total Harmonic Distortion < 10%
Frequency 50 - 60 Hz
Certification CE
Insulation Class 1 - requires an earth connection
Power inlet IEC C14
External control signal Gavita Master controller analog protocol (<11,5V) - see manual EL controller
External dim connector RJ14 connector builds in (6P6C On/off only.
Dimming is not supported by the Master controller)