Aqua One Pond One O2 Plus Air Pump - 8000 | 4200L/H | 10 Outlet | 32kPa | 47W

SKU: APUMP15002

Pond One

ETA: 1-3 Weeks

Qty:

In stock with supplier Dispatches in 1-3 Weeks

Pick up at store Free

Delivery Options:

If cart total is less than $499*

Freight applies

If cart total is $499* & above

Free

*excluding bulky items

Calculate shipping

International shipping

Click here

SECURE PAYMENTS WITH

BUY NOW, PAY LATER

Pay in 4, interest-free. Afterpay it.

ZIP NOW, PAY LATER

Repay on a convenient weekly, fortnightly or monthly schedule.

ENJOY NOW, PAY LATER

Aqua One Pond One O2 Plus Air Blowers from Pond One are specifically designed for outdoor use and are resistant to the perils that extreme weather can throw at them. Fitted with a 10m cable, installation is made simple in comparison to other models around.

Aqua One Pond One O2 Plus 4000, 8000 and 12000 air machines are extremely powerful units. With outputs of 35, 70 and 110 litres per minute these are suitable for seriously large ponds or filters to stimulate aerobic activity or simply to add more oxygen to multiple points around the pond. With the design based upon the Aqua One indoor units, quietness is a given. Outlet size is 1/2 inch.

Each unit comes with a 10 gang splitter allowing multiple air stones to be run simultaneously. The diaphragms of these pumps are Japanese silicone rubber cartridges which offer excellent reliability and life expectancy.

*To maximise the life of your pump, replace airstones* every 6-12 months. Avoid positioning the pump in a dusty or damp spot.

Specifications

Description: O2 Plus 8000
Max Flow Rate L/h: 4200
Cable Length m: 10
Operating Voltage: 240V/50Hz

In The Box

[1] x Aqua One Pond One O2 Plus Air Pump - 8000 | 4200L/H | 10 Outlet

High volume, high-pressure pond air pump
Enable the connection of up to 10 air stones
High-grade long-life silicone parts
Twin air filters supply clean air to the pond by removing dust and pollution
Aid in the circulation of dead water spot
10m outdoor rated cable
2 + 1 Year Guarantee
Where possible place the pump above the aquarium/reservoir

Documents

Download PDF brochure

Q: How can I clean the pump's air filter?

A: Begin by taking off the filter cover and extracting both the woolen air filter and sponge. Lightly tap the filters on a hard surface to remove any dirt. If the sponge has accumulated a lot of dirt, rinse it with water. Ensure they're entirely dry before repositioning. Before setting up the pump back in place, plug it in and check its functionality.

Q: What could be causing my pump to produce noise?

A: First, ensure the pump isn't vibrating against any surfaces. Additionally, conduct the diagnostic steps highlighted in the "Pump is on, but no air output" section.

Q: My pump is running, but it's not emitting air. Why?

A: Ensure the airline isn't twisted or bent. Verify that the air filter isn't clogged, obscured, or soiled. Consider replacing the airstones. If you've recently set up the pump, adjust the airstones to a position nearer to the water surface. If air starts emerging, the pump might not be potent enough for its current depth. Lastly, carry out a pressure assessment as advised in the adjacent tips panel.